AI bots · Mistral AI MistralAI-User: fetches for Mistral users
MistralAI-User opens a page when someone asks Mistral’s assistant a question. Here is what Mistral publishes about it, linked to the source, and how its other two tokens differ.
- Fetches on a user’s request
- Follows robots.txt
- Official IP list
MistralAI-User at a glance
What Mistral AI publishes about MistralAI-User, with a link to the page each fact comes from. Copy the robots.txt rule you need, or check whether an IP really belongs to it.
What the operator says about MistralAI-User
Each row links to the page it comes from. “Not published” means we could not find it in the operator’s own documentation.
| Fact | Value | Source |
|---|---|---|
| Operator | Mistral AI | Source |
| Official documentation | docs.mistral.ai | Source |
| robots.txt token | MistralAI-User | Source |
| What it is used for | Fetches on a user’s requestMistral says MistralAI-User visits web pages when a user of its assistant asks a question, so the answer can cite and link the source. It is not used for automatic crawling or AI training. | Source |
| Follows robots.txt | YesMistral lists MistralAI-User among its robots.txt tags and says the tag governs which sites these user requests can be made to. | Source |
| Official IP list | mistral.ai/mistralai-user-ips.json | Source |
| How to verify | IP listMistral publishes MistralAI-User’s IP addresses in mistralai-user-ips.json; check the source IP against it. No other method is described. | Source |
| Checked on | — |
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; MistralAI-User/1.0; +https://docs.mistral.ai/robots)As published by the operator.
robots.txt rules
Add one of these groups to the end of your robots.txt. The token is matched case-insensitively.
User-agent: MistralAI-User
Disallow: /User-agent: MistralAI-User
Allow: /A group named for MistralAI-User replaces your User-agent: * rules for it. To keep it out of one folder only, change / to that folder, e.g. Disallow: /private/.
Check a request really came from MistralAI-User
Check an IP against the official list
Open mistral.ai/mistralai-user-ips.json, copy everything and paste it below with the IP from your log. The check runs in your browser.
JSON or one range per line. IPv4 and IPv6 ranges are both read.
Paste an IP address to check it.
Also from the operator’s documentation
Version v1.0Updated Update history
Four facts that decide what to do
Every crawler page has the same table. These four rows answer most questions about a crawler.
What it is used for
Training, search or a user’s request. Blocking a training crawler keeps your pages out of future models; blocking a search crawler also removes you from answers that would have linked back.
Follows robots.txt
“Yes” is the operator’s own statement. “Partly” usually means fetches a person starts may skip robots.txt — ChatGPT-User, Perplexity-User and meta-externalfetcher say so.
Official IP list / reverse DNS
The only way to tell a real crawler from one that copies its user agent. If neither is published, the user agent is just a claim.
Not published
We could not find it in the operator’s own documentation. We do not fill gaps from third-party lists — those disagree with each other and go stale.
Facts were checked against the operators’ pages on the date shown on each crawler page. Operators change their docs; the source link is the place to confirm.
From a name in your logs to a rule
Four steps, all in the browser.
-
1
Find the crawler
Type the name from your logs or the company you are thinking of. Filter by purpose to see, say, every AI training crawler.
-
2
Open its page
Read what the operator says it is for and whether it follows robots.txt. Copy its official user agent to compare with your logs.
-
3
Build the rules
Tick crawlers in the table, choose Block or Allow, then copy or download the robots.txt groups.
-
4
Check the effect
Test the file with the robots.txt tester, and use the IP check on a crawler page to confirm a request is genuine.
How crawlers are grouped and how robots.txt applies
The directory groups crawlers the way TapCub’s bot rules do. robots.txt matching follows RFC 9309: a crawler obeys the one group whose User-agent matches its token, and only falls back to * when no group names it.
- A crawler with its own group ignores every
User-agent: *rule - Tokens are matched without regard to case; a typo matches nothing
- Some names are tokens only — Google-Extended and Applebot-Extended never visit
- Agents without a published token cannot be addressed in robots.txt at all
| Group | What it does | Effect of blocking |
|---|---|---|
| AI training | Collects pages for model training or datasets | Your future pages stay out of that operator’s training, if it follows robots.txt |
| AI search | Indexes pages for AI answers with links | You stop appearing as a cited source |
| AI agent | Opens a page for a person’s request | Assistants cannot open your page — when the agent honours robots.txt at all |
| Search engine | Classic search index | You leave that search engine; some, like Bing, also feed AI answers |
How four robots.txt files treat MistralAI-User
MistralAI-User reads the group whose User-agent line matches MistralAI-User (case does not matter). If there is none it falls back to User-agent: *.
| robots.txt | Result for MistralAI-User | Why |
|---|---|---|
User-agent: MistralAI-User Disallow: / | Blocked | Its own group disallows the whole site. |
User-agent: * Disallow: / | Blocked | No group of its own, so it inherits the wildcard. |
User-agent: * Disallow: / User-agent: MistralAI-User Allow: / | Allowed | A named group replaces the wildcard completely; the * rules no longer apply to it. |
User-agent: MistralAI-User Disallow: /private/ | Allowed except /private/ | Only paths that start with /private/ are off limits. |
This is how the rules read under RFC 9309. Whether MistralAI-User follows them is Mistral AI’s statement in the facts table above.
Where AI crawler policies go wrong
Most problems come from the token or from what the crawler actually is.
Using a company name as the token
“OpenAI”, “Anthropic” or “ChatGPT” are not tokens. Use the exact token from the directory — GPTBot, ClaudeBot, OAI-SearchBot.
Blocking search with training
Blocking OAI-SearchBot or PerplexityBot removes you from AI answers that would link back. Decide per crawler, not per company.
Trusting the user agent
Anyone can send “GPTBot” in a header. Without an IP or reverse-DNS check the request is unverified.
Blocking by IP and losing the opt-out
Anthropic and Cohere warn that blocking their IPs stops them reading robots.txt, so the opt-out may not stick.
See which crawlers actually came
The directory tells you what crawlers say they do. TapCub separates humans from bots with five detection layers and 197+ rules, and reports AI crawlers on their own.
Bot and AI crawler report
User agent, headers, client signals, ASN and rate — five layers that keep bots out of your human numbers.
Learn moreAI content ledger
Pages each AI crawler read next to the visitors it sent back.
Learn moreCrawl health and compliance
Compare robots.txt and llms.txt with what actually crawled you — evidence for a decision.
Learn moreMistralAI-User questions
Still have a question?
Chat with the team behind TapCub — we usually reply within a few hours on business days.
What is MistralAI-User?
MistralAI-User is run by Mistral AI. Mistral says MistralAI-User visits web pages when a user of its assistant asks a question, so the answer can cite and link the source. It is not used for automatic crawling or AI training.
Does MistralAI-User respect robots.txt?
Mistral lists MistralAI-User among its robots.txt tags and says the tag governs which sites these user requests can be made to.
How do I block MistralAI-User?
Add User-agent: MistralAI-User and Disallow: / to robots.txt, in its own group. Mistral AI says it follows those rules. To keep it out of one folder only, use Disallow: /folder/ instead.
How can I tell a request really came from MistralAI-User?
Mistral publishes MistralAI-User’s IP addresses in mistralai-user-ips.json; check the source IP against it. No other method is described.
How do I stop Mistral training on my site?
Mistral documents a separate token for that, MistralAI-Training. MistralAI-User only covers fetches a user asks for.
Update history
New features, fixes and data refreshes for this tool, newest first.
-
· v1.0
LaunchedFirst release.
Data this tool relies on
- Bot and AI crawler rules (same as the TapCub product) — checked 2026-11-10, reviewed every 3 months (next review by 2027-02-10)
- AI crawler operator documentation — checked 2026-11-09, reviewed every 3 months (next review by 2027-02-09)
Missing something or found an error? Tell us — requests that come up often go into the next update. All tool updates
Rules state intent. Logs show behaviour.
Install the ≈2 KB script and TapCub separates humans, search engines and AI crawlers from the first visit — free plan included.