TapCub is live — analytics, insights and live chat, free on one platform
Glossary

What are interstitial ads? Types, rules and the real cost

Interstitial ads are full-screen ads shown at breaks between content. The types, what Google and the Better Ads standards say, and a worked example of ad revenue against retention and conversions.

Emma Collins Reviewed by Chloe Morgan Also called interstitial ad Last updated Nov 19, 2026 Glossary

Quick answer

Interstitial ads are full-screen ads shown at a break between content, such as between game levels, articles or screens. They earn well because they take the whole screen, and cost retention because they interrupt; judge them on both.

Formula: Net effect = extra ad revenue − value of lost return visits − value of lost conversions

What are interstitial ads?

Interstitial ads are full-screen ads shown at a break between pieces of content: between levels of a game, between articles, when a page opens or when someone moves from one screen to another. Google's AdMob documentation describes them as rich, interactive ads designed to be placed between content, ideally at natural transition points in an app. The viewer has to close the ad, or wait for it to finish, to continue.

They pay well because they take the whole screen and get attention that a banner never gets. They cost something for the same reason: they interrupt. That trade, revenue now against the person's willingness to continue, is the entire subject of this page.

On the web the same format is usually called a pop-up or an overlay. If it appears before the content loads, the Coalition for Better Ads calls it a prestitial; if it appears after the content has started to load, a pop-up.

What kinds of interstitials are there?

TypeWhere it appearsWhen it showsMain risk
App interstitialMobile app or gameAt a natural break, such as between levels or screensShown too often or at the wrong moment
Video interstitialApp or webBetween content, often with a delayed close buttonForced waiting
Web prestitialMobile or desktop webBefore the page content loadsVisitors leave before seeing anything
Web pop-upMobile or desktop webAfter the page has begun to loadCovers the content the visitor came for
App-install interstitialMobile webAsks the visitor to install an appHides content; Google has flagged it as a mobile-usability problem
Required dialog (age gate, consent)AnyWhen a rule requires itNot an ad; treated differently by search

Google's AdMob guidance adds that close buttons can be delayed: up to 5 seconds on some interstitials, up to 12 seconds for interstitial video ads when high-engagement ads are enabled, and up to 30 seconds for some video ads from third-party bidding sources. A delayed close is a design choice that the visitor experiences as a wait.

What do the rules say?

Two bodies of guidance matter to a site owner:

  • Search. Google Search Central says intrusive interstitials and dialogs block the visitor's view of the content, usually for promotional purposes. Interstitials cover the whole page and dialogs cover part of it. It recommends banners that take up only a small fraction of the screen, and says that content a site must gate (an age gate, for example) is exempt. Google says these overlays make content harder for search to understand and can hurt search performance.
  • Advertising standards. The Coalition for Better Ads classifies mobile prestitial ads and mobile pop-up ads among the experiences that fall below its Better Ads Standards, and certifies publishers that avoid them.
  • App platforms. AdMob advises placing interstitials at natural transition points, and avoiding surprising users, showing too many ads or obstructing use of the app.

None of this bans interstitials. It describes where they cost the most.

Do interstitials earn more than they cost?

Sample data: a content site with 10,000 mobile sessions a day tests an interstitial that appears on average 0.7 times per session at a $10 CPM. The comparison is the same traffic before the change.

Measure (per 10,000 sessions a day)WithoutWith interstitial
Ad revenue per session$0.020$0.020 + 0.7 × $10 ÷ 1,000 = $0.027
Ad revenue per day$200$270
Bounce rate40%48%
Visitors returning within 7 days30%26%
Sign-up conversion rate2.0%1.7%

The interstitial adds $270 − $200 = $70 a day. Now count what it costs:

  • Lost return visits. Returning visitors fall by 10,000 × (30% − 26%) = 400. If a returning visitor brings 4 more sessions in the next month at the baseline $0.027 per session (sample figure), the loss is 400 × 4 × $0.027 = $43.20.
  • Lost sign-ups. Conversions fall from 200 to 170, which is 30 fewer. At a $15 value per sign-up (sample figure), the loss is 30 × $15 = $450.

Net: $70 − $43.20 − $450 = −$423.20 a day. The format "worked" on its own revenue line and lost on the whole. The rule behind the example: judge an interstitial against retention and conversion in the same table as its ad revenue. If the site has no conversion to protect (pure ad revenue), the return-visit loss still has to be smaller than the gain.

When is an interstitial reasonable?

Use these if-then rules to decide where the format fits:

  • Natural pause exists (end of a level, end of an article, a screen transition that already loads): place it there, not mid-action.
  • The visitor has not seen your content yet (first screen from search): do not interrupt; this is the case Google's search guidance targets.
  • Close button delayed: keep the delay short, because the waiting time counts as a cost.
  • Frequency: cap it per session and per day; a rise in bounce or fall in return visits right after a frequency change is the signal to reduce it.
  • Required by rule (age gate, legal notice): keep it as a dialog on top of the content, not a separate page.

Common mistakes with interstitial ads

  • Measuring only the ad revenue. The revenue line always goes up first; the cost shows later in retention and conversions.
  • Showing it on the first screen. A visitor from search who sees nothing but an overlay leaves.
  • Counting the interstitial as a custom event and thinking bounce improved. If you send your own event when the ad shows, the session no longer counts as a bounce, so the bounce rate falls without any improvement. See the next section.
  • Comparing different weeks. A holiday or a campaign changes traffic; compare like periods.
  • Changing frequency and placement together. You cannot tell which one moved the numbers.

How to measure interstitial impact in TapCub

Take the example above. TapCub does not serve ads and does not report ad impressions or ad revenue; those stay in the ad platform. It measures the visit behavior around them.

  1. Mark the launch day. Add a date annotation in Configuration › Annotations, so the charts show where the interstitial started.
  2. Compare before and after. In Web analytics › Overview use the previous-period comparison for bounce rate, average duration and pages per session. A bounce is one pageview and no custom event.
  3. Mind the event trap. If you add a custom event such as interstitial_shown, TapCub counts any session that fires it as non-bounce, because custom events end a bounce. Compare engaged rate (a session lasting at least 10 seconds or with 2 or more pageviews) as the cross-check.
  4. Isolate mobile. In Web analytics › Audience, click a device type to filter, then compare the report against the same days a week earlier.
  5. Check conversions and speed. Web analytics › Goals shows whether goal conversions fell; Monitoring › Performance shows real-user page performance, which ad scripts can affect.

TapCub does not run split tests, so the comparison is before and after, or between two periods you control. See bounce, impressions and mobile UX.

Sources

Was this explanation clear?

We use your answers to fix and expand this page.

Emma Collins

Product Analyst

Focuses on event analysis, conversion funnels, and retention, using clear metric definitions and structured analysis to explain product performance.

FAQ

Questions people ask

Short answers to the follow-up questions that come up most.

Still have a question?

Chat with the team behind TapCub — we usually reply within a few hours on business days.

What are interstitial ads?

Interstitial ads are full-screen ads shown at a natural break between content, such as between game levels, articles or screens. The viewer has to close the ad or wait for it to finish before continuing. Google's AdMob describes them as placed between content.

Do interstitial ads hurt SEO?

Google Search Central says intrusive interstitials block the view of content and can make it harder for search to understand, which can hurt search performance. Overlays required by law, such as age gates, are treated differently, and small banners are the recommended alternative.

How often should an interstitial ad appear?

Only at natural pauses and with a cap per session and per day. Watch bounce rate and returning visitors after any change: a rise in bounce or a fall in return visits is the sign the frequency is too high.

What is the difference between an interstitial and a pop-up?

The formats overlap. On the web, an overlay shown before the content loads is called a prestitial and one shown after loading starts is a pop-up. App interstitials appear at transitions between screens or levels.

See this number on your own site

Add one script tag for web and apps, and the first reports fill in within minutes.

See your data clearly. Find your growth.

Every click, backed by data. Install one line of code and see your first numbers in a minute.

No credit card · Free plans for analytics and chat · Cookieless analytics