TapCub is live — analytics, insights and live chat, free on one platform
Glossary

View-through rate (VTR): formula, what counts as a view and how it differs from view-through conversions

View-through rate is views divided by impressions, but the word also names a different metric. The formula with a worked example, what counts as a view, and how to read the number.

Lin Zhou Reviewed by Emma Collins Also called VTR Last updated Nov 21, 2026 Glossary

Quick answer

View-through rate (VTR) is the share of video ad impressions that end in a view: views ÷ impressions. Google counts a view at 30 seconds, the full ad if shorter, or a click. The name is also used for a different metric, view-through conversions, so check which one a report means.

Formula: VTR = views ÷ impressions (e.g. 18,000 ÷ 300,000 = 6.0%)

What view-through rate measures

View-through rate (VTR) has two meanings in advertising, and most confusion comes from mixing them up.

  1. Video completion meaning. Google's Authorized Buyers help defines VTR as the number of completed views of a skippable ad over the number of initial impressions: complete views (the user did not skip) divided by impressions (the ad rendered).
  2. Post-impression conversion meaning. Some reports use "view-through" for people who saw an ad, did not click it, and converted later. Google Ads calls those events view-through conversions and reports them in their own column.

Google Ads itself now uses a third label for the first meaning. Its help page on YouTube view metrics says the metric is called view rate and was previously known as view-through rate. So when someone sends you a "VTR", ask which of the two they mean before comparing it with anything.

This entry covers the video meaning first, because that is what "view-through rate" most often refers to, and then shows how it differs from view-through conversions. For the denominator, see impressions; for what a thousand of them cost, see CPM.

How to calculate view-through rate

VTR (view rate) = views ÷ impressions

Google's example: 5 views from 1,000 impressions is a 0.5% view rate. Here is a larger one.

Sample data: three video creatives, 100,000 impressions each, bought at a cost per view of $0.15.

CreativeImpressionsViewsVTRCost at $0.15 per view
A100,0007,0007.0%$1,050
B100,0004,8004.8%$720
C100,0006,2006.2%$930
Total300,00018,0006.0%$2,700

The total row matches the simple average of 7.0, 4.8 and 6.2 (6.0%) only because the impression counts are equal. When impression counts differ, always divide total views by total impressions instead of averaging the three percentages. A creative with 10,000 impressions and 9% VTR must not weigh the same as one with 1,000,000 impressions and 4%.

Spend per view is the same $0.15 in every row only because we set it that way; in a real buy it varies by creative, audience and auction. The point of the table is the ratio: creative A delivers 46% more views per impression than creative B (7.0 ÷ 4.8 = 1.46), so at equal impression prices it is also the cheaper way to get a view.

What counts as a view

The numerator is the part that changes between platforms, so write down the rule before you compare numbers. For skippable in-stream video on YouTube, Google Ads help says a view is counted when:

  • the viewer watches 30 seconds of the ad, or the whole ad if it is shorter than 30 seconds;
  • or the viewer clicks an element of the ad, such as a call-to-action, card, banner, thumbnail or logo (the click is counted as well).

Bumper ads and non-skippable in-stream ads do not generate these views, and their impressions are left out of the denominator for the paid view rate.

Three things sound alike and are not the same:

TermWhat it countsExample rule
ImpressionThe ad was served and renderedCounted before anyone watches
Viewable impressionThe ad was actually on screenFor video: at least 50% of the ad's area visible while the video plays for at least 2 seconds (Google Ads, Active View)
ViewThe viewer engaged30 seconds, the full ad if shorter, or a click on the ad

A viewable impression can still be skipped after 5 seconds, so it is not a view. The relationship in practice is impressions ≥ viewable impressions ≥ views.

VTR versus view-through conversions

A view-through conversion is a conversion from someone who saw your ad without interacting with it and later converted on your site. The conversion window is set when you create the conversion action; Google's help uses 30 days as its example. For video, "saw" means the viewer got a view as defined above.

The related ratio, used in some reports, is view-through conversions ÷ impressions. Sample data: with 300,000 impressions and 41 view-through conversions, it is 41 ÷ 300,000 = 0.0137%. That figure and the 6.0% above share a name and nothing else: one measures attention, the other measures a delayed outcome.

Two cautions from Google's documentation:

  1. Except for a few campaign types, view-through conversions are for reporting only and are not included in the main Conversions column.
  2. They carry no click, so no landing-page visit exists to link them to a source. Any tool that records only visits cannot see them.

How to read a VTR

Google's own article on view metrics says an average of about 10–15% is typical for in-stream ads and that it varies by industry. Use that only as a rough range. Rules that hold up better:

  • Compare like with like. Compare the same format, the same length and the same placement. A 6-second bumper has no paid view at all under the definition above.
  • If VTR falls when you widen the audience, the new audience cares less; this is the normal cost of reach, not a creative problem. Check whether CPV rose at the same time.
  • If VTR is high but visits are low, the hook works and the call to action does not. The fix is in the last seconds of the ad or the landing page, not the opening.
  • If VTR is low in the first week and then rises, you may simply have been learning an audience; do not cut the creative before the impression count is large enough. Fewer than 1,000 impressions gives a VTR that moves by a full percentage point for every 10 views.

Common mistakes with view-through rate

  • Treating a view as "watched the ad". The 30-second rule means a 3-minute ad counts as a view after one-sixth of its length; the click rule means someone who clicked at second 2 also counts.
  • Averaging percentages. Divide total views by total impressions, as in the table.
  • Comparing VTR across platforms. Each platform decides what the denominator and numerator are.
  • Reading VTR as profit. A view is not a visit and not an order. The test of a video ad is what the people it sent did next.
  • Adding view-through conversions to conversions and then calculating a cost per acquisition. The platform separates them for a reason.

What you can measure in TapCub

TapCub does not buy, serve or measure ads, so it has no impressions and no video views; VTR lives in your ad platform. What TapCub measures starts after the click, on your site.

Take the sample campaign above. The ad platform reports 18,000 views and 900 clicks. To see what the visits did:

  1. Tag the video campaign's links with UTM parameters, then open Web analytics › Sources and filter to that campaign to see its visitors, pages and sessions.
  2. Open Web analytics › Goals to see how many of those sessions reached a goal, such as a sign-up or purchase. Bots and AI crawlers are counted separately, so they do not inflate the visits.
  3. Import the campaign's daily spend in All-platform analytics › Business › Channel ROI; the page divides spend by sessions for cost per click and by purchases for cost per acquisition.
  4. Compare sessions in TapCub with clicks in the ad platform. If the ad platform shows 900 clicks and TapCub shows 870 sessions, the gap is the first thing to explain (visitors leaving before the page loaded, blocked scripts).

View-through conversions will not appear, because a person who never clicked leaves no visit to match. Treat the platform's number as a separate, platform-reported figure.

Sources

Was this explanation clear?

We use your answers to fix and expand this page.

Lin Zhou

Product Experience Specialist

Writes about product experience, practical workflows, and growth, turning complex processes into clear steps for everyday decisions.

FAQ

Questions people ask

Short answers to the follow-up questions that come up most.

Still have a question?

Chat with the team behind TapCub — we usually reply within a few hours on business days.

What is a good view-through rate?

Google's help says about 10–15% is the average for in-stream ads and that it varies by industry. Compare only within the same format, length and placement, and judge a video by the visits and goals it produces, not by VTR alone.

Is view-through rate the same as click-through rate?

No. Click-through rate is clicks ÷ impressions. VTR is views ÷ impressions, and a click on the ad also counts as a view for skippable in-stream video. A video can have a high VTR and a low click-through rate.

What is the difference between view-through rate and a view-through conversion?

VTR describes what happened to impressions: how many became views. A view-through conversion is a later sale or sign-up from someone who saw the ad and never clicked. Google reports view-through conversions in a separate column.

Can TapCub show view-through rate?

No. TapCub does not serve ads and has no impression or video-view data. It shows what visitors from a tagged campaign do on your site: sessions, goals and, with spend imported, cost per click and cost per acquisition.

See this number on your own site

Add one script tag for web and apps, and the first reports fill in within minutes.

See your data clearly. Find your growth.

Every click, backed by data. Install one line of code and see your first numbers in a minute.

No credit card · Free plans for analytics and chat · Cookieless analytics