Quick answer
GRP, or gross rating points, measures how much advertising exposure a campaign delivers: reach (%) times average frequency, or impressions as a percentage of the target population. It can exceed 100 and measures exposure, not results.
Formula: GRP = reach (%) × average frequency = 100 × impressions ÷ population
What GRP means
GRP stands for gross rating points. It is a measure of how much advertising exposure a campaign delivers, expressed as impressions divided by the size of the defined population, times 100. One point equals impressions equal to 1% of that population. The IAB UK glossary describes GRP as a metric for how large an audience a media vehicle or schedule reaches, counting impressions as a share of the market's population (IAB UK).
Because repeat exposures are counted, GRPs add up across ads and can exceed 100. A campaign with 150 GRPs does not reach 150% of people; it delivers exposure equal to everyone in the market seeing the ad one and a half times on average.
What GRP does not say matters as much. It measures potential exposure or impressions, not confirmed attention and not results. TapCub does not buy or run broadcast or other media, so this page is about reading a GRP number correctly and measuring what happens after it.
The formulas
Wikipedia gives these equivalent forms (Wikipedia: Gross rating point):
| Form | Formula | Use when |
|---|---|---|
| From impressions | GRP = 100 × total impressions ÷ defined population | You have a count of impressions |
| From reach and frequency | GRP = reach (%) × average frequency | You have a reach estimate and average exposures per person reached |
| From ratings | GRP = sum of the ratings of each ad in the schedule | You have per-spot ratings, as in broadcast planning |
A related term is target rating points (TRP): the same calculation, but for a narrower target audience such as women 25–44 instead of all adults. GRP uses the whole defined population; TRP uses the target.
A worked example: same GRP, different campaigns
Sample data: a market of 2,000,000 people. Two plans each buy 3,000,000 impressions.
| Plan | Impressions | Reach (people) | Reach % | Average frequency | GRP |
|---|---|---|---|---|---|
| A: spread widely | 3,000,000 | 1,200,000 | 60% | 3,000,000 ÷ 1,200,000 = 2.5 | 60% × 2.5 = 150 |
| B: concentrated | 3,000,000 | 600,000 | 30% | 3,000,000 ÷ 600,000 = 5.0 | 30% × 5.0 = 150 |
Check: from impressions, 3,000,000 ÷ 2,000,000 × 100 = 150 for both plans. Plans A and B have the same GRP, but A reaches twice as many people and B shows the ad twice as often to those it reaches. GRP alone cannot tell you which is better. If the message needs repetition to work, B may win; if the goal is awareness among many people, A may.
Now add cost. Suppose a four-week flight costs $60,000. Cost per point is $60,000 ÷ 150 = $400 per GRP. A lower cost per point looks cheaper, but it says nothing about whether the exposure led anywhere.
How to read the GRP in a media plan
Before comparing two plans, ask four questions of the number:
- Which population is it based on? All adults, households or a target segment? A GRP on a different base is a different size.
- Over what period? A weekly GRP and a four-week GRP are not comparable without saying so.
- How were impressions counted? As opportunities to see (potential) or as measured views? The number can differ a lot.
- Is it GRP or TRP? For a target group, divide target impressions by the target population: if 600,000 impressions land among 400,000 target people, TRP = 600,000 ÷ 400,000 × 100 = 150.
If the answers are missing, the GRP is a headline number, not a comparison.
From GRP to results: what you can and cannot see
GRPs describe delivery, upstream of your site. Results appear downstream, in your own data. The two connect only through comparison:
| Layer | Measure | Where it comes from |
|---|---|---|
| Delivery | GRP, reach, frequency | Media plan and audience measurement vendor |
| Cost | Spend, cost per point | Invoice |
| Response | Sessions, conversions | Your analytics |
| Effect | Extra sessions and orders compared with what would have happened anyway | Your analytics plus a baseline |
Continue the example: baseline traffic is 1,000 sessions a day, or 28,000 over 28 days. During the flight it is 37,000. The lift is 37,000 − 28,000 = 9,000 sessions. At a 2% conversion rate that is 9,000 × 2% = 180 orders. Cost per extra session is $60,000 ÷ 9,000 = $6.67, and cost per extra order is $60,000 ÷ 180 = $333.
These are estimates of incremental effect, not proof. Weather, promotions and seasonality can move the baseline. The decision rule: treat a lift measured this way as a range, check it against a comparable period without the campaign, and read incrementality before you rely on it. Attribution models cannot credit this kind of exposure, because no click ties it to a visit.
Common mistakes
- Reading 150 GRPs as 150% reach. GRP counts repeats; reach is capped at 100%.
- Comparing GRPs across different audiences. A GRP in all adults and a TRP in a narrow segment are not the same size.
- Treating GRP as a result. It is a measure of delivery. Impressions are an opportunity to see, not a view or an action.
- Ignoring frequency. Too low and the message is not noticed; too high and it is wasted. The right level depends on the product and competition, so there is no fixed target.
- Crediting only last-click traffic. Broadcast-driven visits often arrive as direct or branded search, so a click-based view understates them.
- Quoting a GRP without its base and period. "150 GRPs" means little until you know the population and the weeks it covers.
- No baseline. Without the traffic you would have had anyway, any lift is a guess.
Measuring after the GRP in TapCub
Use the four-week flight above and look at it in TapCub. TapCub does not plan, buy or bid for media and has no GRP data; it measures what arrives on your site.
- Mark the flight. Add the start and end dates in Configuration › Annotations so every chart shows the flight window.
- Watch the baseline and the lift. In Web analytics › Overview, compare daily sessions in the flight with the same weekdays before it, and see where visits come from in Web analytics › Sources: direct, search and campaign-tagged traffic.
- Tag what you can. If the creative carries a landing page or a vanity URL, give it UTM parameters so its visits appear as their own campaign in Web analytics › Sources.
- Bring in the spend. In All-platform analytics › Business › Channel ROI, import spend by day, channel and campaign. The page computes cost per click (spend ÷ sessions) and, where orders exist, cost per acquisition and return on ad spend.
- Count conversions. Define a goal under Web analytics › Goals so that the 2% rate in the example is measured, not assumed. Known bots are counted apart, so visits from crawlers do not inflate the lift.
TapCub measures the lift and the cost on your side of the click. Whether the GRPs were delivered as planned is a question for your media vendor.
Sources
- IAB UK, Gross rating point (GRP).
- Wikipedia, Gross rating point.
Was this explanation clear?
We use your answers to fix and expand this page.
Couldn’t send. Please try again in a minute.
Thanks for the feedback. We’ll use it to improve this page.You’ve already sent feedback on this page. Thanks.

Product Analyst
Focuses on event analysis, conversion funnels, and retention, using clear metric definitions and structured analysis to explain product performance.